Home Cisco Cara Cara Setting Konfigrasi OSPF di Cisco Packet Tracer

Cara Cara Setting Konfigrasi OSPF di Cisco Packet Tracer

by Erzed
Kali ini admin akan membahas Tutorial tentang KONFIGURASI OSPF DENGAN CISCO PACKET TRACER. Oke langsung saja ke topik pembahasan.
Pertama kita buat dahulu sebuah jaringan , seperti gambar dibawah…..
 Kali ini admin akan membahas Tutorial tentang KONFIGURASI OSPF DENGAN CISCO PACKET TRACER Cara Cara Setting Konfigrasi OSPF di Cisco Packet Tracer
Selanjutnya..
berikan IP Address pada setiap PC.. 
1. PC 1 dengan nama “PC0”..
 Kali ini admin akan membahas Tutorial tentang KONFIGURASI OSPF DENGAN CISCO PACKET TRACER Cara Cara Setting Konfigrasi OSPF di Cisco Packet Tracer
2. PC 2 dengan nama “PC 2”..
 Kali ini admin akan membahas Tutorial tentang KONFIGURASI OSPF DENGAN CISCO PACKET TRACER Cara Cara Setting Konfigrasi OSPF di Cisco Packet Tracer
3. PC 3 dengan nama “PC 3”..
 Kali ini admin akan membahas Tutorial tentang KONFIGURASI OSPF DENGAN CISCO PACKET TRACER Cara Cara Setting Konfigrasi OSPF di Cisco Packet Tracer
Tahap selanjutnya berikan IP Address pada setiap router . Contoh sebagai berikut : 
Pemberian IP Address di Router 1
— System Configuration Dialog —
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 172.18.8.1 255.255.0.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip add 192.168.8.1 255.255.255.0
Router(config-if)#band 125
Router(config-if)#cl ra 125000
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit
Konfigurasi EIGRP pada Router 1,
Router(config)#router ospf 4
Router(config)#router-id 2.2.2.2
Router(config-router)#net 172.18.8.0 0.0.255.255 area 0 
Router(config-router)#net 192.168.8.0 0.0.0.255 area 0
Router(config-router)#log-adjacency
Router(config-router)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration…
[OK]
Router#
Pemberian IP Address di Router 2 
— System Configuration Dialog —
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 172.19.9.1 255.255.0.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip add 192.168.8.2 255.255.255.0
Router(config-if)#band 125
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit 
Router(config-if)#exit
Router(config)#int se3/0
Router(config-if)#ip add 18.8.8.1 255.0.0.0
Router(config-if)#band 125
Router(config-if)#cl ra 125000
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial3/0, changed state to down
Router(config-if)#exit 
Konfigurasi OSPF pada Router 2,
Router(config)#router ospf 4
Router(config-router)#net 172.19.9.1 0.0.255.255 area 0
Router(config-router)#net 192.168.8.0 0.0.0.255 area 0
Router(config-router)#net 18.8.8.0 0.255.255.255 area 1
Router(config-router)#log-adjacency
Router(config-router)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration…
[OK]
Router#
Pemberian IP Address di Router 3
— System Configuration Dialog —
Continue with configuration dialog? [yes/no]: no
Press RETURN to get started!
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 172.16.10.1 255.255.0.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#int se2/0
Router(config-if)#ip add 18.8.8.2 255.0.0.0
Router(config-if)#band 125
Router(config-if)#no shut
%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit
Konfigurasi OSPF pada Router 3,
Router(config)#router ospf 4
Router(config)#router-id 4.4.4.4
Router(config-router)#net 172.16.10.0 0.0.255.255 area 1
Router(config-router)#net 18.8.8.0 0.255.255.255 area 1
Router(config-router)#log-adjacency
Router(config-router)#end
Router#
%SYS-5-CONFIG_I: Configured from console by console
wr
Building configuration…
[OK]
Router#
Setelah dikonfigurasi, coba di ping antara PC0 , PC1 dan PC2..
SELAMAT MENCOBA…………….
Apabila kurang terang dapat di tanyakan……………..


Sumber Web Wanajay

Baca :  Cara Ubah Kuota VideoMax / Maxstream Menjadi Kuota 24 Jam / Ke Reguler Telkomsel Terbaru 2019

You may also like